FREE SHIPPING ON ORDERS OVER $120

HYPERLOW Vert Freestyle 5" Frame


Regular price $99.95
HYPERLOW Vert Freestyle | FPV QUADS
HYPERLOW Vert Freestyle | FPV QUADS
HYPERLOW Vert Freestyle | FPV QUADS
HYPERLOW Vert Freestyle | FPV QUADS
HYPERLOW Vert Freestyle | FPV QUADS

 

Product Description

 HYPERLOW Vert Freestyle Big brother to the Vert Racer, this low profile - stretched X - mid-mount - vertical arm design (developed by Bob Roogi) now carries a GoPro! Mount included.

Build at a Hyperlow 10mm with an AIO and ESC's on arms, or at 15mm with the included carbon spacers for a 4 in 1 + FC stack build. Both sets of hardware included. 

The 5mm carbon arm spacers used for a 15mm build even allow you to offset the front and rear prop planes by raising the rear arms for cleaner air, avoiding prop wash. 

The frame maintains a slim body profile thanks to the strap plate borrowed from the unibody series. This allows for dual straps use without compromising main plate integrity, and adds a lateral battery mounting option. The battery is also cushioned by a custom neoprene pad, along with a smaller pad for the VTX antennas SMA 

Features
  • Mid-mount 5" freestyle frame
  • Vertical ams
  • Stretched X
  • 10mm + 15mm hardware
  • GoPro Mount
  • Double strap plate
  • 3 Battery straps
  • Lateral battery mounting option
  • RX antenna mounts, straws and caps
  • Battery and antenna pads
  • Pressnut assembly
  • Offset rear prop plane
  • Ships with extra arm
  • Micro cam only - mounts included
  • Weight 120g
Recommended Gear 
Requirement is a Micro cam (mount included) and recommended VTX is a Unify or smaller with pigtail. 

Micro RX will be the easiest fit, especially for a 10mm build. Crossfire and larger will fit in a 15mm build. 
Naked bottom motors recommended to clear bolt head at end of the arm, although many full bottom motors still fit (eg. Emax 2306)

    Includes
    • 1 x 2mm top plate
    • 1 x 2mm bottom plate
    • 1 x 2mm camera bumper
    • 1 x 1.5mm strap plate
    • 4 x 5mm arm spacers (for 15mm build)
    • 5 x 5mm arms
    • 5 x 5mm arm brace
    FPV Mounts
    • TPU micro cam mounting set
    Session Mount
    • 2 x TPU prints
    • 2 x 30mm standoffs
    • 4 x bolts
    RX Antenna
    • 2 horizontal mount
    • 2 angled mounts
    • straws + caps
    Pads
    • 1 x Battery pad
    • 1 x Antenna pad
    FC Mounting
    • 4 x 1mm nylon washers 
    • 4 x 5mm nylon standoffs
    • 4 x nylon nuts
    Hardware
    • 6 x 10mm standoffs
    • 6 x 15mm standoffs
    • 8 x 22mm bolts (for 15mm arms)
    • 8 x 16mm bolts (for 10mm arms
    • 4 x 14mm bolts (for arm to brace attachment)
    • 4 x locknuts (for arm to brace attachment)
    • 6 x 12mm bolts
    • 6 x 10mm bolts
    • 4 x 8mm
    • 12 x nylon nuts
     

    Customer Reviews

    Based on 1 review Write a review

    Related Products


    Sale

    Unavailable

    Sold Out