FREE SHIPPING ON ORDERS OVER $120

HYPERLOW Vert Racer 5" Frame


Regular price $89.95
HYPERLOW Vert Racer Frame | FPV QUADS
HYPERLOW Vert Racer Frame | FPV QUADS
HYPERLOW Vert Racer Frame | FPV QUADS
HYPERLOW Vert Racer Frame | FPV QUADS

Product Description

This Hyperlow mid-mount racing frame features a new approach to arm design developed by Bob Roogi (Hyperlite/Floss); a double stack assembly with all the benefits of a vertical arm, and none of the drawbacks.

At 10mm tall and 4.5mm wide, the arms allow for the motor mount to be cut from the layer, with the bottom layer adding extremely rigid support and the benefit of aerodynamic positioning. The arms then double as standoffs, with the kit only needing a total of two for camera mounting. 
Mid-mount battery positioning helps gives the frame fluid maneuverbility, while a double strap plate and adequate prop berth can house up to a 1600maH lipo safely.

 

Recommended Gear

AIO flight controller (ideally a low profile 36mm x 36mm board) Micro RX (eg. XM+) Pigtail VTX (Unify, Tramp, or smaller. Ideally the new Unify Nano) Micro Cam (eg. Swift Micro) Naked Bottom Motors (although some full bottom motors will fit)
Its recommended to assemble the frame minus the top plate during the build.  Dry fit all components first. Orient FC for best fit, paying attention to USB access.  This may involve flipping the board, or rotating it, and also adjusting its height.  VTX orientation should allow for pigtail to reach the rear mounting point. 

An example layout is RX tucked between the two front arms and camera, VTX occupying the 30x30 area behind the front arms and FC mounted in rear. 

Includes
  • 1x HYPERLOW Vert Racer Frame
  • Battery and antenna pads 
  • 2 x Hyperlow battery straps
  • 15mm hardware and carbon spacers
  • TPU camera dome
  • 10mm hardware still included. 

Related Products


Sale

Unavailable

Sold Out